Partial truckload, LTL or full truckload: which a shipment needs
The choice comes down to how much trailer space and weight the shipment takes. LTL suits one to about six pallets: the freight shares trailers, passes through carrier terminals and is priced by freight class, weight and distance. Partial truckload suits roughly 6 to 18 pallets that ride on one trailer from pickup to delivery, and full truckload gives one shipment the whole 53-foot trailer, which holds 26 standard pallets.
Last updated
| LTL | Partial truckload | Full truckload | |
|---|---|---|---|
| Typical size | 1 to about 6 pallets | About 6 to 18 pallets, roughly 5,000 to 25,000 pounds | 18 to 26 pallets, or up to about 42,000 to 45,000 pounds |
| How it moves | Local pickup, sorted at one or more terminals, line haul, local delivery | Shares one trailer with one or two other shipments, no terminals | One trailer, one shipment, pickup to delivery |
| Handling | Loaded and unloaded several times | Loaded once, unloaded once | Loaded once, unloaded once |
| Priced by | Freight class, weight, distance, plus extra charges such as liftgate | Space used and weight | The trip: lane, equipment and the market on the day |
| Transit | Usually the slowest; depends on the terminal network | Can take a day longer than a full truckload | Usually the fastest |
Start with linear feet
Truckload and partial carriers plan by linear feet: how much of the trailer’s length the freight takes. Standard 48 by 40 inch pallets loaded straight sit two across, and each pair takes 4 feet. So the floor a shipment uses is the number of pallets divided by two, rounded up, times 4 feet.
- 8 pallets: 4 rows, 16 feet.
- 13 pallets: 7 rows, 28 feet, a little over half a 53-foot trailer.
- 26 pallets: 13 rows, 52 feet, a full trailer.
If pallets can be stacked two high, they take half the floor. Pallets of other sizes, or pallets turned so the 40-inch side runs along the trailer, change the count, so measure the actual footprint.
Then weight and density
LTL carriers price by freight class under the National Motor Freight Classification (NMFC). There are 18 classes, from 50 to 500; a lower class means denser freight and a lower charge per pound. For most commodities the class now follows density, so measure it:
- Multiply length, width and height in inches, including the pallet, and divide by 1,728 to get cubic feet.
- Divide the weight in pounds by the cubic feet to get pounds per cubic foot.
For example, a pallet 48 by 40 by 60 inches weighing 800 pounds is 66.7 cubic feet, a density of 12 pounds per cubic foot. Light, bulky freight takes up trailer space faster than it adds weight, which is one reason it often moves better as a partial than as LTL.
Truckload freight is limited by weight as well as space. A truck on the interstate may weigh at most 80,000 pounds in total, which leaves roughly 42,000 to 45,000 pounds for freight in a 53-foot dry van.
When LTL is the right call
- One to about five pallets of sturdy, well-packed freight.
- Deliveries that need a liftgate truck or go to a business without a loading dock; LTL networks are set up for those stops.
- There is time to spare: a few extra days in transit is acceptable.
When a partial truckload makes sense
- About 6 to 18 pallets, or more than about 12 feet of trailer.
- Fragile or awkward freight that should not be unloaded and reloaded at terminals.
- An LTL quote that has climbed because of volume or space charges.
Many LTL carriers apply volume or linear-foot rules once a shipment passes about six pallets or 10 to 12 feet of trailer. At that point it is worth asking for a partial or volume price as well.
When a full truckload makes sense
- More than about 18 pallets, or more than about 36 feet of trailer.
- Heavy freight: partial loads usually top out around 25,000 pounds, because the trailer carries other shipments too.
- High-value or time-critical freight, where one truck and one driver from dock to dock is worth having.
What else changes the answer
- Stacking. Freight that cannot be stacked uses twice the floor of freight that can.
- Docks. 53-foot dry vans need a loading dock or a forklift at both ends. Most do not carry a liftgate.
- Appointments. Many receivers only accept trucks at booked times, and a shared partial load has to fit every stop’s window.
- Hazardous materials. Placarded loads need a carrier and driver qualified to haul them, which narrows the choice.
- Temperature. A dry van is not temperature-controlled. Freight that heat or cold can damage needs a refrigerated trailer, whatever its size.
Have this ready when you ask for a price
- Pickup and delivery city or ZIP code, and whether each has a dock
- Ready date, and any delivery appointment
- Pallet count, pallet size, height, and whether pallets stack
- Total weight and what the freight is
- Anything hazardous, fragile or temperature-sensitive
Stowage is not quoting freight yet: our broker authority application is pending with FMCSA.
Introduce yourself
If you ship freight in or out of Southern California and want to hear from us when our authority is active, send a short note. Writing to us does not ask for a price or a shipment, and we will not offer to arrange anything until the authority is active.